P-Series

  • These pneumatically actuated piston pumps are designed for periodically operated, single-line lubrication for industrial applications, like expanded metal machinery or textile machinery.

    The P-Series feature a range of pump types compatible with oil and fluid greases.

    • Simple handling
    • Optional low-level control for reservoir

  • System overview

    Compressed air connection
    All pumps within the range are to be connected to a compressed air supply line.

    Reservoir
    Pumps in the P-Series are available with or without a lubricant reservoir. Reservoirs can be located above or below the pump and made of high quality plastics or steel, depending on the model.

    Filling cap or nipple
    Depending on the pump type and what kind of lubricant is used, P-Series pumps are equipped with a filling cap or filling nipple to re-fill the reservoir. The filling cap and nipple both have an integrated filter to filter out contaminants of the lubricant.

    Level monitor
    The P-Series pumps can be delivered with or without a low level monitor to monitor the filling level in the reservoir. A special level monitor is available for systems that are going to be used with fluid greases.

    When the level of lubricant is too low, the signal of the low level monitor can be used to switch off the pump or as a visual or acoustic warning-signal.

    Outlet
    The P-Series pump has one outlet which transfers the lubricant to the metering devices. The most common combination is to use the system with the DVB-1-2-3 or 231-DV single-line metering devices.

    Working principle
    Lubrication starts when the piston is pressurized. The compressed air is adjusted in a way that the pressure relief valve only opens when all metering valves finished the process. This ensures that all metering valves supply enough lubricant to the lubrication points.

    When the 3/2-way solenoid valve for the air supply switches over, the piston is pushed into its original position by the pressure spring. Pressure in the main line is relieved to approx. 1 bar by the relief valve and the metering valves restock the lubricant for the next lubrication pulse. At the same time, the lubricant is sucked out of the reservoir for the next stroke.

    The metering device’s total delivery volume should not exceed 60% of the pump’s delivery quantity

     

  • Click here to go to the Groeneveld-BEKA Portal for extensive technical and commercial documentation.

  • Click here to go to the Groeneveld-BEKA Portal for extensive technical and commercial documentation.

Optional low-level control for reservoir

Compatible with oil and fluid greases

Simple handling

Do you have questions or are you looking for advice? We're here to support you.

Is this the product that met your business needs? You can easily request a quote.

Contact us

Contact

Captcha Code

Click the image to see another captcha.

Search

Please select your region and language

We use cookies which are necessary for the proper functioning of our website. If you want to know more or to change your cookie settings on your computur or device, please see our cookie policy. By clicking on the “accept” button you agree with the use of all the cookies exceeding the scope of mere technical operation - as mentioned in our cookie policy