BEKA Dry belt system

The BEKA Dry belt system offers the advantage of an effective belt lubrication without the use of water and soap and are suitable for the use of common dry belt media like oil with
Teflon or silicones.

Besides the common use as a belt lubrication system for the filling- and packing industry (typically used for surface treatment), the system can also be used as a pure return belt
system.

Dry belt system
Oil containing Teflon or silicones is applied precisely onto the conveyor belt. As a result, the objects on the belt slides smoothly. No water and soap contaminate your products and
environment. Wear and tear between objects and belt are reduced. This solution is often used for an internal transport of products to reduce the friction of heavily loaded belts on
conveyor belts.

Pure return belt system
Oil containing Teflon or silicones is injected between the belt and support plate. This solution is often used for an internal transport of products into reduce the friction of heavily loaded belts on tracks. As a result, the belt runs smoothly, noise and current consumption of the driving motors are reduced.

Groeneveld-BEKA offers 2 dry belt systems, the Foodline Mini and the Foodline Max. The Mini is perfect for smaller machines and systems. The Max is the ultimate solution for mid-sized machines and big plants.
System overview
The system housing contains the control panel, the main switch and the pressure gauge. All parts which come in contact with the medium are made of stainless steel or Viton. Both Foodline Mini and Max are suitable for all kind of lubricants, with a thin or high viscosity.

Piston pump
The dry belt systems is equipped with a piston pump which is placed into the reservoir.

Reservoir
The reservoirs of the Foodline Mini and Max are made of polypropylene plastic and is available in either 5 or 10 liters.

Metering valves
Special metering valves are available for the dry belt systems, entirely made of stainless steel, Viton and with special rubber seals. They are available in 4 sizes with a fixed output from 0,075; 0,10; 0,15 or 0,20 cm3.

Lubricant apply brush
A special oil brush is available for the dry belt system. Lubricant is supplied to the brush via clamping strips. The clamping strips contain holes which transfer the medium to small dripping holes at the bottom of the strip.

The brush comes in one size and can be shortened to fit the width of the conveyor belt.

Lube-Shooter
As an alternative to the apply brush a special Lube-Shooter can used for contact free lubrication of the belt. The Lube-Shooter is available as a static and dynamic metering vale.

Slide track

Especially for return belt lubrication a slide track is available for the dry belt system. The slide track comes in 2 versions: a general version with nozzles for retrofitted systems and a fitting block for track systems with integrated lubrication pads according to manufacturer specifications.
Click here to go to the Groeneveld-BEKA Portal for extensive technical and commercial documentation.
Click here to go to the Groeneveld-BEKA Portal for extensive technical and commercial documentation.