BEKA Grease pump station

The BEKA® Grease pump station is a customized automatic lubrication system, completely adapted to the requirements of the machine. The grease pump station can be set-up as a dual-line lubrication system or as an extensive progressive sectional lubrication system.

Because of the customization of the system, a grease pump station can be used as a small oil lubrication system for one or two smaller machines, or even larger machines or plants.

System overview

An grease pump station, whether it’s being used as a dual-line or progressive system, consists of a few standard components:

• A barrel pump
• A control unit
• One or several monitoring devices
• One or several metering devices

Grease pump station used as a dual-line system

When used in a dual-line system, the grease is pumped to the distribution blocks via a double main line network. The metering units supply the exact right amount of grease to each of the lubrication points.

The benefit of the dual-line system is that the system can deal with very long distances.

Grease pump station used as a progressive sectional system

In a progressive sectional system, the lubrication system is divided into several sections. In each section multiple distributors are collected. Each section is separately connected to a main line and can be lubricated individually.

Each section is being operated by the control unit. The main dividers are supplied with grease by a gear pump which pumps the oil from a separate oil reservoir.

A progressive sectional system is most commonly used when different machines are connected, but not always working at the same time. The benefit of the sectional system is that each section can be controlled independently.

No links or downloads available