The BEKA ONE is an electromechanical lubricator designed to supply lubricant to single lubrication points. The BEKA ONE is the ideal solution to supply lubricant in a safe, precise and reliable way where an automatic lubrication system is too large or too complex.
The BEKA ONE ensures reliable lubrication for 1 up to 24 months per filling. The best part is, the system can be refilled as often as needed. Due to the exchangeable batteries, there’s a one-time acquisition for the BEKA ONE.
There are two versions of the BEKA ONE, one with a grease cartridge and one with a refillable reservoir. Whether you need to lubricate with oil or grease, the BEKA ONE can do it. It’s an environmental friendly and economical solution, easy to install wherever lubrication is necessary.
- Works with batteries, no special battery pack necessary
- Operating pressure of max. 20 bar
- Suitable for oil and grease
- Remote mounting up to 10 meters
- Can be used wherever there are lubrication points
1. Magnetic cap
The magnetic cap is the key component of the BEKA ONE. With this cap you can set the operation time of the system, or power the system on and off without contaminating the pumps inside.
2. Protective cover
The BEKA ONE has a protective cover to make sure the system is protected from dirt, dust and liquids. Due to the IP-rating of the system, you don’t have to worry about cleaning with a high pressure washer.
3. Grease cartridge
The cartridge version of the BEKA ONE is equipped with a 120 ml grease cartridge. You can easily replace the cartridge when it’s empty and be assured that the right grease is used without any contaminations.
4. Lubricant reservoir
The refillable version of the BEKA ONE is equipped with a 120 ml reservoir, suitable for oil and grease. The reservoir can easily and quickly be refilled with a grease gun or oil press, using the grease fitting. Replacement of the reservoir is not necessary. Because the grease fitting is located behind the cover it’s protected from dirt, dust and liquids, preventing contamination of the lubricant during refilling.
The BEKA ONE is driven by two 1.5V AA-batteries which are safely covered and replaceable when low on power. There’s no special battery pack needed, you can use standard batteries. To achieve functionality at a certain pressure and below a certain temperature, it’s recommended to use Lithium-ion batteries.
6. Activation zone
The activation zone is used to activate and set-up the system in combination with the magnetic cap. The settings can easily be changed any time. The delivered amount of lubricant varies on the selected month settings.
7. Indication LEDs
Bright LEDs indicate the system operation. Green LEDs show the remaining lubrication cycles for the filling, while a bright red LED starts flashing when an error occurs or the batteries are running low. The LEDs also indicate the backpressure of the system after each lubrication cycle.
The BEKA ONE has a metal outlet thread to mount the system directly on a lubrication point. If necessary an adapter can be used. Remote mounting of the system with a polyamide tube is also possible.
No links or downloads available
- Brochure BEKA ONE (968.88 KB)
- Manual BEKA ONE (6,203.35 KB)
Suitable for oil and grease
Operating pressure up to 20 bars
Once in a lifetime buy due to replaceable batteries
Do you have questions or are you looking for advice? We're here to support you.
Is this the product that met your business needs? You can easily request a demo.
Please select your region and language
1Select your continent